Payment & Shipping Terms:
|Name:||Fractional Co2 Laser||Treatment Depth:||Max 2mm|
|Function:||Scar Removal, Wrinkle Removal, Skin Rejuvenation||Output Power:||1-30W|
|Aiming Beam:||Red Diode Laser||Laser Wavelength:||10600nm|
|Scanning Area:||Max 20x20mm||Gurantee Time:||Two Free Years|
Fractional Co2 Laser Treatment for Stretch marks , Acne scars , Vaginal Tightening
Change the physical medium and emission method of current laser technology by focusing tremendous optimized energy. Through Laser Emitter.The micropulsed laser beam shooting on target skin in nano level to achieve a controllable and precise treatment.The dimension of shooting area only can be measured in nanometer, which is precise enough for operator to control and adjust the treated depth and layer according to the clinical diagnosis.The energy of CO2 Fractional laser is even and steady, its focused energy aims only at target tissue without any injury to surroundings.During the scan treatment, surrounding tissue of the shooting area plays a role as the “bridge” or “carrier” to share and diffuse the over heat produced by micro pulsed laser beam so as to avoid skin burnt.During the treatment , biochemical reactions of optical-thermal can accelerate collagen reproduction and skin recovery, after exfoliation of the tiny scar, fresh and smooth skin can be regenerated.
1. Scar & Acne removal
2. Skin rejuvenate and resurfacing Wrinkle removal
3. Skin tightening
4. Smooth burnt and surgery scars
5. Removal intractable chloasmas and pigmentation
6. Skin sun damage recovery
7. Vagina tightening,beautify,moist,improve sensitivity
1. RF Laser Tube is more stable and makes the scanning dot much thinner and less
2. Swelling, itching, crusting, and tenderness.
3. The Laser Tube frequency can reach more than 5000HZ, get better treatment effect.
4. Four working modes ,Fractional, CW, Pulse, Ultra Pulse ,can been used in widely in different surgery.
5. Special designed energy self-inspected and energy-replenishment system, improving the stability and effect.
6. Multi safety protection, water, electric ,remote interlock warning alarm.
7. Laser anti-leak designing, confirm the operator and client safety.
8. Whole low voltage system, no electric danger and no electric radiation.
|Cosmetic Application||Rhytides (Wrinkles)||Medical Application||Actinic keratosis (sun-damaged skin, precancerous lesions)|
|Mottled dyspigmentation||Seborrheic keratosis (sun-damaged skin, precancerous lesions)|
|Telangiectasia (RedSpots)||Sebaceous hyperplasia (yellow, shiny bumps on the face)|
|Solar lentignes (brown spots)||Rhinophyma (nose swelling and tissue over growth|
|Large pores, Rough skin texture||Epidermal Melasma (Brown spots)|
|Laser sourse||American RF Laser Tube|
Continuous Wave Mode (CW)
Pulse Mode (single and repeated)
Ultra Pulse Mode
|Power of laser generator||Max 60W|
|Focus Diameter||≤0.1-1.2 mm|
|Treatment Depth||Max 2mm|
|Aiming Beam||Red Diode laser (650nm,≤5mW)|
|Delivery System||7-Articulation Joint Spring Arm|
|Scanning Area||Max 20×20mm|
Ellipse, Rectangular, Triangular,Line
Middle split Mode
|Smoke Exhausting System||Built-in air blow|
|Cooling system||Air Cooling|
CO2 Laser Q & A
Q: WHAT IS CO2 LASER RESURFACING?
A: CO2 Laser Resurfacing is a laser treatment that addresses sun damaged skin, uneven pigmentation, wrinkle reduction, pore size reduction. CO2 Laser Resurfacing also targets loose skin while brightening under eye circles and helps with healing acne and acne scarring.
Q: HOW DOES CO2 LASER RESURFACING WORK?
A: CO2 Laser Skin Resurfacing uses energy to vaporize aged or damaged skin while also stimulating new collagen growth to the surrounding tissue.
Q: WHO ARE GOOD CANDIDATES FOR LASER CO2 RESURFACING?
A: The best candidates for CO2 Laser Resurfacing are patients with a light skin tone, skin types 1 through 3. Skin type can be determined by a doctor or aesthetician.
Q: WHAT AREA CAN BE TREATED WITH THE CO2 LASER?
A: The most common areas to treat with the CO2 Laser are the face, neck and hands. Other areas can be treated depending on the patients and their needs. Treatment areas will be discussed during a pretreatment consultation.
Q: HOW MANY LASER CO2 RESURFACING TREATMENTS WILL IT TAKE TO ADDRESS MY CONCERNS?
A: The amount of treatments is decided on an individual patient basis. It may take as little as one treatment or up to six treatments to obtain maximum results. The number of CO2 Laser treatments needed is discussed during a pretreatment consultation.
Q: HOW LONG DO CO2 LASER RESURFACING TREATMENTS TAKE?
A: The entire face can be treated by the CO2 Laser in as little as 30 minutes. The total treatment time can vary depending on topical application and the number of laser passes needed for treatment.
Q: WHAT CAN I EXPECT TO FEEL DURING A CO2 LASER RESURFACING TREATMENT?
A: Topical anesthetic is applied before the CO2 laser treatment to make the procedure virtually painless. Minimal discomfort may be felt but it is overall very tolerable.
Q: WHAT SHOULD I DO TO PREPARE FOR MY CO2 LASER RESURFACING TREATMENT?
A: It is very important to avoid sun exposure pre CO2 laser treatment. This includes use of tanning beds and application of self-tanners. Patients should use a lightening cream, such as hydroquinone, 1-2 weeks prior to CO2 laser treatment. Patients are advised to start an antibiotic 1 day prior toCO2 laser treatment.
Q: SHOULD I EXPECT ANY DOWNTIME AFTER MY LASER CO2 RESURFACING TREATMENT?
A: Downtime post Laser CO2 Resurfacing treatments is dependent on a number of different factors. Downtime should be expected and can better be addressed during your pretreatment consultation.
Q: HOW SOON WILL I SEE RESULTS AFTER MY LASER CO2 TREATMENT AND HOW LONG WILL MY RESULTS LAST?
A: Immediately following your Laser CO2 Resurfacing treatment, your body will naturally start working by replacing aged tissue cells with new ones. Shortly after your procedure you will notice your skin to be visibly smoother, healthier, and younger looking. Laser CO2 Resurfacing results will continue to improve over the next 6 months.
Q: WHAT POST-TREATMENT CARE IS NEEDED FOLLOWING MY LASER CO2 PROCEDURE?
A: There is a list of post-procedure care instructions that will be reviewed at the time of your consultation. Patients will also receive a copy of take home instructions. These instructions include proper times to ice, apply ointment, a list of medication to take, and if and when you should contact a doctor.
We can offer the door to door service by air, DHL, UPS, TNT, FEDEX and Air cargo is our usual shipping methord.
Xi'an Taibo Electronic Technology Co., Ltd. takes the leading in applying advanced laser and Intense light technology in beauty industry. Now we developed IPL series, E-light, Co2 fractional laser, 808nm diode laser, ultrasonic cavitations, fractional RF and hair re-growth laser, 980nm diode laser, cryolipolysis, lipo laser, water oxygen jet peel system, etc.
With efficient R & D team, mass production ability and reliable quality control system, Our company offer OEM&ODM service and help our clients build up their own reputation and more competitive in the market. All the process of the producing is under ISO13485 Quality system and match with CE certification request.
Keep leading in technology and service is always our aim. Your trust and support make us success.
Xi'an Taibo Electronic Technology Co., Ltd. will work hard constantly for supplying best product and after sale service.
RoomB-605 Haibo Plaza FengCheng 9 Road Xi’an Shaanxi Province
Company: Xi'an Tai Bo Electronic Technology Co. Ltd.E-mail: email@example.com
Contact Person: Lily Xue