Payment & Shipping Terms:
|Name:||Q-switch Nd Yag Laser||Frequency:||1-10HZ|
|Function:||Tattoo Removal, Pigment Removal||Hand Wavelength:||1320nm, 1064nm, 532nm|
|Spot Size:||1-8mm Adjustable||Power:||100-2000mj|
|Cooling System:||Water Cooling||Pulse Duration:||10±3ns|
1-10HZ Highest Frequency of Treatment / Three Wavelength 1064nm,1320nm,532nm for Tattoo Removal, Pigmentation
How Q Switch Nd yag Laser works
The Q-Switched ND YAG laser utilizes two energy frequencies; 1064 nanometers, to target deeper skin layers, and 532 nanometers, to address hyperpigmentation and more superficial layers.
Q-Switched lasers produces extremely brief pulses of energy. Both nanosecond lasers (billionths of a second pulses) and picosecond lasers (trillionth of a second pulses) are types of Q-switched lasers.
These lasers are able to condense a very large amount of energy in a very fast pulse, creating a high “peak” of energy.
A Q-switched Nd:YAG laser produces light that travels at the 1064 nm wavelength in brief, intense pulses. Most Q-switched lasers also have a KTP filter that frequency-doubles the light into the 532 nm wavelength.
When it comes to laser tattoo removal, the Q-Switched ND YAG laser targets ink pigment and breaks it up into smaller particles through powerful bursts of energy.* The ink is then absorbed into the blood stream and eventually expelled from the body.
There are two elements that make Q-Switched Nd:YAG lasers essential for treating skin conditions:
The 1064 nm and 532 nm wavelengths can be useful for targeting certain pigments
The pulse is powerful enough to destroy its target, but brief enough to not harm the skin
Treatment with Q-Switched Nd:YAG Laser
This classification of lasers are useful for treating:
pigmented lesions (brown spots, age spots, etc.)
vascular lesions (spider veins)
non-ablative skin rejuvenation
In all of these cases, the QSW Nd:YAG laser is important for the treatment because the laser is able to penetrate into the skin (or nail) without harming it and have the energy absorbed by the target (whether it be tattoo pigment, hemoglobin, melanin, or fungus).
The two different wavelengths are used for different applications, as they are absorbed differently by pigments and chromophores.
1. Spot size: 1-8mm adjustable
2. Pulse energy: 100-2000mj
3. Pulse Rate: 1-10 Hz, each time can add by 1 Hz
4.7-Articulation Joint Spring Arm
5. Will not destroy hair follicle, will not injure ordinary skin
6. Suitable to all kinds of skin color people
7. Water temperature and water flow alarm system, keep machine from unexpected damage
8. 532nm, 1064nm, treatment heads make sure it suit for all kinds of tattoo and pores.
|Voltage||220V, 10A, 60HZ;110V, 10A, 50HZ|
|Output mode||Q-switch Pulsed output|
|Wavelength||1064nm, 532nm, 1320nm|
|Single Pulse energy||100mj-2000mj|
|Safety distance||NOHD 1km. Operator must wear goggles|
|Cooling system||Water cooling|
|Work mode||Continually work with intervals|
|Spot Size||1-8mm adjustable|
|Guide light beam||650nm red laser|
1. Can you treat all colours?
No. Light is measured in nanometres and there are two wavelengths of light that are emitted from this
laser C one is invisible infrared light (1064nm) and the other is visible green light (532nm). The infrared
wavelength is preferably absorbed into black and dark blue inks, whereas the green light is absorbed by
red ink. It is possible to treat some other colours although white, yellow and bright colours are difficult.
This is not usually a problem however, as lighter colours cover very easily. If you wish to cover-up an
existing tattoo then the darker colours will be faded or removed, allowing you greater choice of size and
colour of the cover- up design you choose.
2. Will the tattoo be removed in one treatment?
No, that is very unlikely. The light can only shatter a certain amount ink in one treatment, so several
treatments are needed at 4-6 weekly intervals to work through the layers. You will notice the tattoo fades more and more with every treatment you have. A test patch will be performed before a full session goes ahead to check how you react to the treatment. A professional tattoo can take between 4 C 5 treatments and sometimes only take 1 or 2. There are several factors that influence the number of treatments required, these can be down to how easily you heal, how deep the ink is in the skin, and the types of ink that were used. Generally speaking the longer you have had the tattoo and the darker it is, the easier it is to remove.
3. What happens to my skin after treatment?
The immediate after effect of the treatment is that the skin turns temporarily white, this is due to water
evaporation and disappears with an hour or two. The skin also swells and feels like mild sunburn, this
usually disappears within 24-48 hours. It may blister too. The body continues to remove ink after the
treatment and the skin is usually back to normal within a few days.
4. Are there any side affects?
Sometimes if you use too high energy, bleeding and/or blistering can occur. Especially for lady's skin, very weak. So you just need to use the energy that can make the tattoos become white, begin from our original energy.
5. Will the laser treatment scarmy skin?
No. If bleeding or blistering does occur it is very important not to pick any scabs that may result when the skin is healing C this could cause scarring, and should be avoided as scar tissue can make further treatments more difficult.
Taibo beauty Company is the professional manufacturer of beauty equipment, medical equipment, Skin rejuvenation System Beauty Salon products and so on. Now we developed IPL series, SHR, E-light, Co2 fractional laser, 808nm diode laser, ultrasonic cavitations, fractional RF and hair re-growth laser, 980nm diode laser vascular removal, High frequency, HIFU skin tightening, HIFU slimming, Water oxygen jet peel, q switch nd yag laser, etc.
Warranty & Services
|Service:||1. 2 year warranty for the mainframe without charges for components change or repairing. Lifetime maintenance without any charge.|
|2. Free training for operation of the equipment in our company, which provided by our specialized training department.|
|3. On-line services, for example, technical consultancies provided by our skilled technique group concerning any question of the laser equipment, and after-sale maintenance and more.|
|4. OEM/ODM services are available. We have our own developing and design department and manufacturing line, which ensure your required beauty equipment|
RoomB-605 Haibo Plaza FengCheng 9 Road Xi’an Shaanxi Province
Company: Xi'an Tai Bo Electronic Technology Co. Ltd.